Product Portrait
ABS sensor
Suitable for: MAN, Mercedes-Benz
Further links
Similar articles from the product range of the brand DT Spare Parts
Note: Accessories are listed on the respective article detail page in the Partner Portal.
Tips & Tricks
The sensor head’s assembly supports must be cleaned before assembly of the new ABS sensor, and all rust must also be removed using sandpaper. The clamping sleeve must be greased using the enclosed assembly grease. Only then can the sensor be pressed as far as it will go into the ABS ring using the grease.
The ease with which the sensor goes into the bearing sleeve is important, as the axial eccentricity of the ABS ring sets the necessary clearance. The sensor cable and the corrugated tube must be assembled without tension, so that the cable ties do not damage or bend the sensor cable. The supporting cabling must lock in place during assembly of the contact plug, so as to prevent moisture penetration.
Construction of the ABS sensor
- Corrugated tube
- Sensor head
- Connector
- Assembly grease/sleeve
- Cable
- Induction coil
- Sleeve